Description
While quantities last.Clearance item. Final sale.No returns or refunds.
*
*
3/4″ Straight Shank ER32 Chuck w/11PC Collets kit, 1/8-3/4 by 16th, #0223-0305
- 11pc ER32 collet set : 1/8″ – 3/4″ by 16th (1/8″, 3/16″, 1/4″, 5/16″, 3/8″, 7/16″, 1/2″, 9/16″, 5/8″, 11/16″, 3/4″)
- All collets are made of high quality alloy spring steel. 0.0005″ accuracy
- 1pc 3/4″ x 2″ straight shank ER32 collet chuck. Draw bar threads 3/8″ x 16; 1pc ER32 spanner
- The holder is also compatible with ER32 coolant through collets. The thread size is 3/8”-16
- Hardened and precision ground
- Placed in fitted plastic case
Design, Assemble, and Dissemble of ER Collet Nut
| Eccentric Design, ISO 15488:2003(E) | Assemble | Inspection | Dissemble |
| The inside of the ER collet nut is intentionally designed like off-centering to help mount the ER collet much easier. It is in accordance with the requirements listed in ISO 15488:2003(E). If it is made symmetrical, the ER collet with the diameter larger than the inside size of the collet nut cannot be installed. | Insert the ER collet into the nut at an angle. Lock it onto the eccentric groove of the collet nut and push it in. (Insert the cutter right after the step, before connect it to the holder/chuck/arbor.) | Inspect the RPM of the ER collet, ER collet nut, ER collet holder/chuck/arbor, etc. | Take out the tool bit, press the end of the ER collet until the collet off the position. Push it out of the nut. (after take out the nut out of the holder.) |
Reviews
There are no reviews yet.