Description
SCLC R/L Toolholders with Carbide Inserts
- Negative 5 end or side cutting edge angle for a positive 80 diamond CCMT CCGT inserts
** For purchasing additional inserts, you may find the corresponding Insert SKU below:
| Item# | Right/Left Hand | Model | Shank Square (A & B) | OAL (C) | F |
Insert Coated, (SKU) |
Insert Screw |
| 2370-5004 | Right | SCLC R-06-2J | 3/8″ | 3-1/2″ | 1/2″ |
CCMT 21.5 (TiN Coated CCMT21.51, 2100-1008) (CVD Coated CCMT21.51-MD, 2200-1008) |
M2.5 x 8 (0046-2508) |
| 2370-6004 | Left | SCLC L-06-2J | |||||
| 2370-5006 | Right | SCLC R-08-3A | 1/2″ | 4″ | 5/8″ |
CCMT 32.5 (CVD Coated CCMT32.51-MD, 2200-1014) (CVD Coated CCMT32.52-MD, 2200-1016) |
M4 x 10 (0046-4010) |
| 2370-6006 | Left | SCLC L-08-3A | |||||
| 2370-5008 | Right | SCLC R-10-3B | 5/8″ | 4-1/2″ | 3/4″ |
CCMT 32.5 (CVD Coated CCMT32.51-MD, 2200-1014) (CVD Coated CCMT32.52-MD, 2200-1016) |
M4 x 12 (0046-4012) |
| 2370-6008 | Left | SCLC L-10-3B | |||||
| 2370-5010 | Right | SCLC R-12-3B | 3/4″ | 4-1/2″ | 1″ |
CCMT 32.5 (CVD Coated CCMT32.51-MD, 2200-1014) (CVD Coated CCMT32.52-MD, 2200-1016) |
M4 x 12 (0046-4012) |
| 2370-6010 | Left | SCLC L-12-3B |
Reviews
There are no reviews yet.