Description
MWLN R/L Toolholders with Carbide Inserts
- Negative 5 end or side cutting edge angle
- For turning, facing and copying
- Accept negative 80 trigon WNMG inserts
- Each holder comes with 10 pieces of TiN coated or CVD coated carbide inserts
** For purchasing additional inserts, you may find the corresponding Insert SKU below:
|
Item SKU # |
Right/Left Hand | Toolholder (SKU#) | Shank Square (A & B) | F | OAL (C) |
Inserts |
Finger Clamp | Clamp Screw | Locking Pins | Shims | |||
| I.C. | Thickness |
Included Insert (SKU#) |
Compatible but not included Insert (SKU#) |
||||||||||
| 2316-0008INS1 | Right | MWLN R-12-4C (2316-0008) | 3/4″ | 1″ | 5” | 1/2” | 3/16″ | CVD Coated WNMG432-MD (2233-1022) |
TiN Coated WNMG432 (2133-1022) |
CL-6 | XNS-0520 |
ZX617 (0028-0617) |
W08B |
| 2316-0008INS2 | Right | MWLN R-12-4C (2316-0008) | CVD Coated WNMG432-MD (2233-1022) | TiN Coated WNMG432 (2133-1022) | |||||||||
| 2316-1008INS | Left |
MWLN L-12-4C (2316-1008) |
CVD Coated WNMG432-MD (2233-1022) | (TiN Coated WNMG432, 2133-1022) | |||||||||
| 2316-0012INS | Right |
MWLN R-16-4D (2316-0012) |
1″ | 1-1/4″ | 6″ | 1/2″ | 3/16″ | CVD Coated WNMG432-MD (2233-1022) |
TiN Coated WNMG432 (2133-1022) |
CL-12 | XNS-0829 |
ZX617 (0028-0617) |
W08B |
| 2316-1012INS | Left |
MWLN L-16-4D (2316-0012) |
CVD Coated WNMG432-MD (2233-1022) |
TiN Coated WNMG432 (2133-1022) |
Carbide Inserts
WNMG432, Carbide Inserts, Tin Coated, 10 Pcs/Set
- Carbide Inserts
- C5 Grade Coated
- ANSI #: WNMG432
- ISO #: WNMG080408
- Insert Style: WNMG
- Insert Size: 432
- I.C.: 1/2″
- Thickness: 3/16″
| Item | Description |
| 2133-1022 | C5 Grade Coated, WNMG080408 |
Carbide inserts, CVD Coating, WNMG, Black/Yellow, 10 ps/box
- For Turning & Boring
- Material: Carbide
- Coating: CVD Al2O3 TICN
- Insert Grade: BPS101
- Chip Breaker: MD
- Machining Parts Material: Steel
- Machining Process: finish
Product features
- BPS101 Black/Yellow Coating Grade
- CVD coated carbide grade, wear-resistance materials coated on the gradient sintered substrate which has both good hardness, toughness
- Can bear high temperatures. For steel and steel castings finishing to roughing processing
- Continue cutting to light interrupted cutting
- Machining of gray and ductile iron at low to medium cutting speed
- For hard materials, continuous cutting and light interrupted cutting from finishing to roughing
- Wet and dry processing
- Combination of fibrous TICN and fine-grained Al2O3 increases abrasion resistance and anti-chipping
- Preferred choice chip breaker on General Purpose Finishing
Features of chipbreaker
- For medium-duty turning
- With broad capability for steel, stainless steel, grey and nodular cast-iron
- Operations: turning, facing and profiling
- Advantages: all-round, reliable with problem-free machining
- Limitations: depth of cut and feed, risk of overloading the cutting edge
- Components typically: axles, shafts, hubs, gears, etc.
| Item # | ANSI # | I.S.O. # | I.C. | Thickness | Hole | Radius |
| 2233-1022 | WNMG432-MD | WNMG080408-MD | 1/2″ | 3/16″ | 13/64″ | 1/32″ |
Reviews
There are no reviews yet.