Description
RH SCLCR Indexable Boring Bars with CCMT Inserts, Key included
- Using 80-degree carbide CCMT inserts a negative 5 degree end and side cutting angle
- Boring from light roughing to finishing in small bores
- With CCMT Carbide Insets and Key included
- Profiling bar for semi-finishing and finishing operations
- Bar hardness is approximately 45HRC
- Extreme fine gloss finish
- Negative 5-degree end & side cutting angle
- Positive 80-degree diamond CCMT inserts or CCGT inserts
** For purchasing additional inserts, you may find the corresponding Insert SKU below:
| Item | Model Code | Shk. |
Mini Bore (d) |
F |
Carbide Inserts (SKU) |
O.A.L | Insert Screw |
| P252-S401 | S06M-SCLCR2 | 3/8″ | 1/2″ | 1/4″ |
CCMT21.5 (TiN Coated CCMT21.51, 2100-1008) (CVD Coated CCMT21.51-MD, 2200-1008) |
6″ |
M2.5 x 5 (0046-2505) |
| P252-S403 | S08Q-SCLCR3 | 1/2″ | 5/8″ | 5/16″ |
CCMT32.5 (CVD Coated CCMT32.51-MD, 2200-1014) (CVD Coated CCMT32.52-MD, 2200-1016) |
7″ |
M4 x 8 (0046-4008) |
| P252-S405 | S10R-SCLCR3 | 5/8″ | 13/16″ | 13/32″ | 8″ |
M4 x 8 (0046-4008) |
|
| P252-S407 | S12S-SCLCR3 | 3/4″ | 1″ | 1/2″ | 10″ |
M4 x 8 (0046-4008) |
|
| P252-S408 | S16T-SCLCR3 | 1″ | 1-1/4″ | 0.651″ | 12″ |
M4 x 10 (0046-4010) |
|
| P252-S409 | S16T-SCLCR4 | 1″ | 1-1/4″ | 0.651″ |
CCMT43 (CVD Coated CCMT432-MD, 2200-1020) |
12″ |
M5 x 10 (0046-5010) |
| P252-S413 | S20U-SCLCR4 | 1-1/4″ | 1-1/2″ | 7/8″ | 14″ |
M5 x 12 (0046-5012) |
|
| P252-S415 | S24U-SCLCR4 | 1-1/2″ | 2 | 1-1/16″ | 14″ |
M5 x 12 (0046-5012) |
Reviews
There are no reviews yet.