Cavity Sliders – Cutout Jigs for CL400 Handle/Striker

Description

About Cavity Sliders

Cavity Sliders USA Inc is the premier manufacturer of sliding door hardware. With strict attention to detail from design through to production, Cavity Sliders offers a product line that is high quality, reliable and operates smoothly. From humble beginnings in New Zealand as a family business, Cavity Sliders has grown to become a world leader in the supply of sliding door hardware. With branches throughout the United States, Australia and New Zealand, Cavity Sliders is committed to upholding the quality level of its existing product line. Emphasis is also placed on developing new products to meet the changing trends of the modern market.

Handle Cutout Jig

CL400 Magnetic Handle Cutout Jig

This jig is made from quality materials that will last a lifetime. It allows for accurate and consistent cutting of the handle recess for the CL400 Magnetic.

1/2 inch Solid Carbide Spiral Cutter for Handle Cutout Jig

Up-cut two flute Solid Carbide spiral cutter, shank x cut diameter x 2 cut length to be used with Handle Cutout Jig. This solid carbide spiral cutter has been

**Router with 1/2″ collet and base plate with 1-1/4″ center opening for guide bushing is required but not included**

Contents
1. Handle Cutout Jig
2. 1/2 Guide Bush
3. Wavy Washer
4. Universal Nut
5. 1/2 inch Solid Carbide Spiral Cutter
6. 1/2 Alignment Pin
7. Instructions

Striker Cutout Jig

CL400 Magnetic Striker Cutout Jig

This jig is made from quality materials that will last a lifetime. It allows for quick, accurate mounting of the CL400 Striker in any wooden closing jamb.

1/4 inch Solid Carbide Spiral Cutter for Striker Cutout Jig

Up-cut two flute Solid Carbide spiral cutter, shank x cut diameter x 1 cut length to be used with Striker Cutout Jig. This solid carbide spiral cutter has

**Router with 1/2″ collet and base plate with 1-1/4″ center opening for guide bushing is required but not included**

Contents
1. Main Striker Jig
2. Striker Jig Insert
3. Screws
4. 1/4 Alignment Pin
5. 1/4 Solid Carbide Spiral Cutter
6. 1/4 Guide Bush
7. Universal Nut
8. Wavy Washer
9. Instructions

Note: The striker jig can be used only on wooden jambs and will leave 3 small screw holes which will need to be filled.

Resource

Brochure
CL400 Handle Cutout Jig Instructions
CL400 Striker Cutout Jig Instructions
FAQ
Warranty