Description
About Tectus by Simonswerk
TECTUS reaches the pinnacle in both design and technology, adhering to the architectural design principle of minimalism to perfection. Thanks to its flush and linear design, the completely concealed hinge system seamlessly integrates with almost any material, making for a uniform appearance within the architecture. The clearer and more reduced the design principle, the greater the requirements are in terms of precision and perfection. Hinge systems from the TECTUS brand create a perfect, detailed starting point for this purpose.
Description
Application
- Single Acting Invisible Hinge
- Interior or Exterior Doors
- For residential and commercial doors
-
Manufactured from solid stainless steel
Handing
- Non-Handed
Features
- Completely concealed hinge system
- Maintenance-free slide bearings
- For wood, steel or aluminum door panels and frames
- Finger protection due to a small gap between door and frame
- Easily adjustable in three dimensions (side +/- 3.0 mm (0.118″), height +/- 3.0 mm (0.118″), compression +/- 1.0 mm (0.039″))
- For flush commercial doors
- Solid non magnetic stainless steel (304 series) (marine grade 316 series upon request)
- UL listed for 180 minute fire door
Note
- Priced by the EACH, standard application requires two (2) hinges per door
- Router templates for installation are sold separately
- Other finishes available upon request
Specification
Technical Data
Load Capacity: 120.0 kg (264.0 lbs.)
Overall Length: 155.0 mm (6.102″)
Width (Door Part): 26.0 mm (1.024″)
Width (Frame Part): 26.0 mm (1.024″)
Cutter Diameter: 24.0 mm (0.945″)
Collar Ring Diameter: 30.0 mm (1.181″)
Door Thickness: For a minimum door panel thickness of 40 mm (1-5/8″)
Opening Angle: 180
Note
- The load capacity mentioned above refers to the use of 2 hinges per door leaf with a height/width ratio of 2:1.
- For fire rated doors: Check with door manufacturer regarding the usage of additional required intumescent material.
- Square-corner cover plates are available upon request.
- For a minimum door panel thickness of 34 mm (1-3/8″).
- The load capacity shall be reduced by 20% when installed in combination with a door closer.
- Alternatively, the routing can be carried out with a cutter diameter of 3/4″ and a collar ring diameter of 1″ for imperial templates.
Suitable For
- Type of door leaf: wood, hollow metal
- Rebate: flush
- Type of frame: hollow metal frames, casing wood frames, commercial wood frames, aluminum frames
Finish
Finishes
- Satin Stainless Steel (040)
- Polished Stainless Steel (042)
Other finishes available upon request
Resource
Product Info
Data sheet
Fitting instruction
Adjustment instructions
Note – load capacity
Maintenance advice stainless steel
Brochures
Brochure TECTUS
Routing Data
commercial wood frame
commercial wood frames – square-cornered
casing wood frame
casing wood frame – square-cornered
hollow metal frame
hollow metal frame – square-cornered
Certificates
Certificate CECertificate UL
Declaration of performance
Reviews
There are no reviews yet.