Description
HSS Corner Rounding End Mills
- Intended for use in milling rounded corners
- The Form-relieved type; can be sharpened repeatedly without changing the form.
- Right-hand cut. Formed radius cutter.
- Suitable for a wide range of ferrous and nonferrous materials
- Material: M2
| Item No. | Radius | Shank Dia. | Cutter Dia. | OAL | Small end Dia. | Large end Dia. | Shoulder Length | Flute Length | Shank Length |
| 1011-0116 | 1/16″ | 3/8″ | 7/16″ | 2-1/2″ | 0.2559″ | 7/16″ | 0.6563″ | 0.0929″ | 1.8437″ |
| 1011-0018 | 1/8″ | 1/2″ | 5/8″ | 3″ | 0.2625″ | 5/8″ | 0.8437″ | 0.1822″ | 2.1563″ |
| 1011-0532 | 5/32″ | 1/2″ | 3/4″ | 3″ | 0.3161″ | 3/4″ | 0.9685″ | 0.2232″ | 2.0315″ |
| 1011-0312 | 3/16″ | 1/2″ | 7/8″ | 3″ | 0.3161″ | 7/8″ | 1″ | 0.2921″ | 2″ |
| 1011-0334 | 3/16″ | 3/4″ | 7/8″ | 3-1/8″ | 0.3161″ | 7/8″ | 1″ | 0.2921″ | 2-1/8″ |
| 1011-1412 | 1/4″ | 1/2″ | 1″ | 3-1/8″ | 0.3838″ | 1″ | 0.9448″ | 0.3188″ | 2.1801″ |
| 1011-0512 | 5/16″ | 1/2″ | 1-1/8″ | 3-1/4″ | 0.3937″ | 1-1/8″ | 1.0626″ | 0.3795″ | 2.1874″ |
| 1011-3812 | 5/16″ | 7/8″ | 1-1/8″ | 3-1/2″ | 0.3937″ | 1-1/8″ | 1.0626″ | 0.3795″ | 2.4374″ |
| 1011-3878 | 3/8″ | 1/2″ | 1-1/4″ | 3-1/2″ | 0.3897″ | 1-1/4″ | 1.0937″ | 0.4444″ | 2.4063″ |
| 1011-0578 | 3/8″ | 7/8″ | 1-1/4″ | 3-3/4″ | 0.3897″ | 1-1/4″ | 1.0937″ | 0.4444″ | 2.6563″ |
| 1011-1201 | 1/2″ | 1″ | 1-1/2″ | 4-1/8″ | 0.3740″ | 1-1/2″ | 1.3779″ | 0.5626″ | 2.7471″ |
| 1011-1234 | 1/2″ | 3/4″ | 1-1/2″ | 3-7/8″ | 0.3740″ | 1-1/2″ | 1.3779″ | 0.5626″ | 2.4971″ |
| 1011-5834 | 5/8″ | 3/4″ | 1-3/4″ | 4″ | 0.5622″ | 1-15/16″ | 1.3779″ | 0.6878″ | 2.6221″ |
| 1011-3434 | 3/4″ | 3/4″ | 2-1/4″ | 4-1/8″ | 0.6251″ | 2-1/4″ | 1.3779″ | 0.8126″ | 2.7471″ |
Reviews
There are no reviews yet.