Description
R8 End Mill Holders with R8 Shank
- TIR: 0.0002″.
- Hardened and Ground
- Made from high-quality steel forgings
- Precision-ground concentric
- Ground shank and hole, heat-treated for double accuracy
- 7/16-20″ drawbar thread
- For Bridgeport type end mill
| Item # | Hold Diameter | Gage Length |
|---|---|---|
| 0222-0840 | 1/4″ | 0.8″ |
| 0222-0841 | 3/16″ | 0.8″ |
| 0222-0842 | 3/8″ | 1.11″ |
| 0222-0843 | 1/2″ | 1.23″ |
| 0222-0844 | 5/8″ | 2.06″ |
The following is for SINGLE END MILLS only
| Item # | Hold Diameter | Gage Length |
|---|---|---|
| 0222-0845 | 3/4″ | 2.57″ |
| 0222-0846 | 7/8″ | 3″ |
| 0222-0847 | 1″ | 3″ |
| 0222-0848 | 1-1/4″ | 3″ |
| 0222-0849 | 1-1/2″ | 3.15″ |
Reviews
There are no reviews yet.