iOptron StarFi WiFi Telescope Adapter

Description

Whether you’re running a visual setup or a portable imaging rig, StarFi helps streamline your observing experience by putting your mount controls right at your fingertips.

Wireless Mount Control from Mobile Devices or Computers

Once connected, StarFi creates a dedicated Wi-Fi network your device can join. From there, you can use supported software like SkySafari, iOptron Commander, or planetarium programs with ASCOM/INDI integration to point, slew, and manage targets directly from your device.

• Compatible with iOS and Android mobile apps

• Also works with Windows/macOS via control software

• Supports both direct-access (AP) and existing Wi-Fi network (Station) modes

• Built-in password protection helps secure your session

Designed for iOptron GoTo Mounts

StarFi is designed to work with a variety of iOptron mounts using serial-port hand controllers. Supported models include:

• CEM25 / CEM25P

• CEM60 / CEM60-EC

• iEQ30 / iEQ30 Pro

• iEQ45 / iEQ45 Pro

• ZEQ25

• SmartEQ / SmartEQ Pro (with appropriate cables and external power)

Note: StarFi is not compatible with the Cube, CubePro, MiniTower, or SmartStar PR series mounts.

Easy Setup with Supplied Cables

The adapter includes the necessary communication and power cables to get started quickly with most compatible mounts. No extra modules or configuration tools are neededjust plug in, connect, and launch your control app or software.

What’s Included

• iOptron StarFi Wi-Fi Adapter

• Serial data cable (4P4C)

• Power cable (6P6C, connects to hand controller port)

• Setup instructions

Observing Tip:
To avoid interference or connection loss during longer sessions, make sure your device is set to stay connected to StarFis network and disable automatic switching to stronger Wi-Fi signals nearby.

Currently supported mounts:

• CEM60/CEM60-EC/iEQ45 Pro/iEQ30 Pro
• iEQ45/iEQ30 w/8407(need aDB9 RS232 male to male connector)
• iEQ45 w/8406 (need aDB9 RS232 male to male connectorand an iOptronRS232-RJ9 cable #8412)
• ZEQ25/CEM25
• SmartEQ/Pro (need an external 12V power source.)
• Cube Pro w/8408 HC and Cube II w/8408 HC
• DOES NOTsupport Cube/MiniTower/SmartStar PR mounts
• May work with other manufacture’s mounts (need aDB9 RS232 male to male connectorand an iOptronRS232-RJ9 cable #8412)

Package Contents:

• StarFiTMWi-Fi adapter
• 6P6C power cable
• 4P4C serial cable
• Instruction manual