Description
Lightly Used, Cleaned and Inspected for Wear.
| Mill Diameter (Inch) : | 5/64 |
|---|---|
| Mill Diameter (mm) : | 2.00 |
| # of Flutes: | 5 |
| Length of Cut (inch): | .300 |
| Shank Diameter (Inch) : | 1/8 |
| Overall Length (inch): | 1.50 |
| Material: | Solid Tungsten Carbide |
| Finish/Coating: | N/A |
| Cutting Direction: | Right Hand |
| Flute Direction: | Right Hand (Up Cut) |
| Flute Type: | Spiral Chip Breaker |
| Helix Angle: | 30 |
| Center Cutting?: | Yes |
| Plunge Tip: | Drill Point |
Reviews
There are no reviews yet.