Description

Shipped directly from PHASE II+ in NJ, USA

Surface Roughness Stand/Profilometer Stand

Model No. SRG-4000-050

Features

Can be used with all Phase II+ 4000, 4500 & 4600 series surface roughness testers/profilometers.

Model No. SRG4600-100

Standard 5m Stylus

For use on flat and slightly curved surfaces

Model No. SRG4500-200

Deep Groove Stylus

For use on deep grooves with min. width of 3mm
and max depth of 10mm. Must be used with supportstand shown above.

Model No. SRG4500-300

Small Hole Stylus

For use in small holes under 2mm diameter and max depth of 9mm

Model No. SRG4500-400

Curved Surface Stylus

For use on curved surface with a minimum
curvature radius of 3mm. Must be used with supportstand shown above

Model No. SRG4500-500

2 Stylus Extension

Adds extra 2 reach for deeper applications

Model No. SRG4500-550

5 Stylus Extension

Adds extra 2 reach for deeper applications

— ** About SRG-4600Surface Roughness Testers /Profilometers/Surface Finish ** —

Surface Roughness Testers /Profilometers/Surface Finish

Model No. SRG-4600

Features

The newest addition to our state-of-the-art surface roughness testers /profilometers, the SRG-4600 will instill the highest level of confidence in your production, shop floor or QC lab. These surface roughness testers/profilometers are distinguished by a high level of accuracy, multiple parameters and simplicity of operation. Extremely sensitive and highly accurate readings from this Phase II surface roughness tester/profilometer is offered via 9 popular surface roughness scales including Ra, Rq(Rms), Rt, Rz and Rmax.

SRG-4600 PORTABLE SURFACE ROUGHNESS TESTER/ PROFILOMETER

The newest addition to our state-of-the-art surface roughness testers /profilometers, the SRG-4600 will instill the highest level of confidence in your production, shop floor or QC lab.Extended memory and output coupled with many updated useful functions, the SRG-4600 surface roughness tester/profilometer is clearly the new leader in ultra accurate surface roughness/profile testing. These surface roughness testers/profilometers are distinguished by a high level of accuracy, multiple parameters and simplicity of operation. Extremely sensitive and highly accurate readings from this Phase II surface roughness tester/profilometer is offered via 9 popular surface roughness scales including Ra, Rq(Rms), Rt, Rz and Rmax.

The new diamond stylus is hypersensitive and sophisticated enough to allow for a .001 (um) micron display resolution. The SRG-4600 surface roughness tester/profilometer can utilize an easy interface to allow for changes of in/mm (uin/um), cutoff length, sampling length, parameters, level of test(stylus position), digital filters and more! Surface roughness measurement results are displayed as large characters on the LCD screen for easy recognition. Battery powered
portability allows the SRG-4600 surface roughness tester/profilometer to mobilize productivity throughout the shop.Further, a wireless Bluetooth auto-start comes standard with each unit. Optional Micro Printer is available, as well as optional stand.

SRG-4600 surface roughness tester features:

• 9 Different roughness parameters
• Inside/Outside Diameters
• Stylus position indicator
• USB/Bluetooth output to PC
• Large Memory

SRG-4600 Surface Roughness Tester/profilometer Technical Specifications:

• Measures flat, Inside and Outside Diameters
• Measures grooves and recessions: wider than 0.16in (4mm)
• Roughness parameters: Ra, Rz, Rq (Rms), Rt, Rs, Rsm, Rmax, Rpc, Rmr.
• Roughness standards: ISO/DIN/JIS/ANSI
• Display resolutions: 0.01m/+/-20 m 0.02m/+/-40 m 0.04m/+/-80 m
• Measuring accuracy: ?10%
• Repeatability: Less than or equal to 6%
• Measuring range: Ra, Rq: 0.01-40m Rz,Rt, Rm: 0.02-160m
• Maximum drive range: 0.7in(17.5mm)
• Cut-off length: 0.009/0.03/0.09inch (0.25/0.8/2.5mm)
• Tracing speeds: speed 1mm/s (sampling length 2.5mm) speed 0.5mm/s (sampling length 0.8mm),
  speed
  0.135mm/s (sampling length 0.25mm)
• Sensor: Inductance type
• Sensor-stylus: Diamond, radius 5m
• Pick up Force: <4mN
• Filter: RC, PC-RC,GAUSSIAN, and D-P
• Data output: USB
• Operating temperature: 41F-104F (5-40C)
• Weight: 0.97lb(440g)
• Dimensions: (119 x 47 x 65mm)
• Power: Li-Ion rechargeable battery
• Auto shut-off

Optional Accessories:

1. Precision Support Stand
2. Deep Groove Stylus
3. Small Hole Stylus
4. Curved Surface Stylus
5. Stylus Extension
6. Micro Printer

SRG-4600 surface roughness tester/profilometer comes supplied with:

• Calibrated Reference Standard w/support plate
• Bluetooth Auto-start
• Leveling plate
• Stylus protector
• A/C Adapter
• Rugged Carry case
• Comes supplied with Data Output Software

Main Screen

Main Screen

Parameters

Roughness Profile

Ratio Curve