Description
This lightly used 10-piece Kyocera chip breaker carbide router set includes0.09375″ / 3/32″ (2.40mm) solid carbide routers with a.400″ LOC, 1-1/2″ overall length, and a 1/8″ shank.
These routers are lightly used, cleaned, and inspected. They are a practical value option forhobby use, prototyping, testing, backup tooling, short-run jobs, and light industrial applications.
- Geometry: Chip breaker cutting edge helps break chips into smaller pieces for improved chip control.
- Tip style: Drill point tip provides added strength for repeated plunging and entry into denser materials.
- Cut direction: Up-cut design supports chip evacuation and bottom-edge cut quality.
- Common material use: FR-4, G10, fiberglass, phenolic laminates, and other abrasive composites.
Not sure whether a chip breaker or diamond flute router is right for your application?Compare chip breaker vs diamond flute routers
View Feed & Speed Recommendations
Common Uses
- PCB and laminate routing, including FR-4 and G10
- Fiberglass and phenolic laminate cutting
- General abrasive composite routing where chip control is helpful
- Testing, prototyping, hobby CNC work, and short-run jobs
- Backup tooling for light industrial use
Benefits
- 10-piece value pack of lightly used, cleaned, and inspected Kyocera carbide routers
- Chip breaker geometry helps reduce long, stringy chips and improve chip control
- Drill point tip provides added strength for repeated plunging and entry into denser materials
- Up-cut design supports chip evacuation and bottom-edge cut quality
- .400″ LOC provides added reach for routing applications requiring more cutting length
- Solid tungsten carbide construction provides rigidity and wear resistance
- 1/8″ shank fits many compact CNC routers and spindles
Specifications
| Tool Type | Carbide Router |
| Quantity | 10 Pieces |
| Condition | Lightly Used, Cleaned, and Inspected |
| Geometry | Chip Breaker |
| Tip Style | Drill Point |
| Cut Direction | Up Cut |
| Cutting Diameter | 0.09375″ / 3/32″ (2.40mm) |
| Length of Cut (LOC) | .400″ |
| Overall Length | 1-1/2″ |
| Shank Diameter | 1/8″ |
| Material | Solid Tungsten Carbide |
| Manufacturer | Kyocera |
| Country of Origin | USA |
Tip style: Drill Point added tip strength for repeated plunging and entry into denser materials.
Need new-condition routers? Browse our full selection ofnew chip breaker routers
Reviews
There are no reviews yet.