Accurate – Sliding Door Sets – 9100ADAL (Entry)

Description

About Accurate Lock & Hardware

Accurate Lock and Hardware fuses old-world craftsmanship with modern technology to create architectural hardware products of uncompromising quality. Our team of experts have created an extensive range of products for the entire door including custom solutions for high end residences, commercial buildings, institutional facilities, and important landmarks such as the White House, Ellis Island, and state capitols. Since 1972, we have operated under one guiding principle: if you can dream it, we can make it. From concept to manufacturing, all Accurate products are proudly made entirely in the USA

Specification

9100ADAL-3

Entry Set Includes:

• 9100SDL Sliding Door Lock
• 72L/1E-CD Outside Escutcheon with Lever
• 72L/1E-ADA Inside Escutcheon with Lever and 7200ADA T-turn

General Specification

• BACKSETS: 2-1/2″, 2-3/4″, 3-3/4″, 5″, 6″ For door stiles 4″ wide and up. Custom narrow and large backsets also available.
• OPERATION:
• 9100 SDL-3 Deadbolt: By key outside, thumb turn inside. Inside handle will retract deadbolt.
• 9100 SDL-5 Deadbolt: By emergency key outside, thumb turn inside. Inside handle will retract deadbolt.
• 9100 SDL-ST Classroom Deadlock: Deadbolt by key outside. Inside handle will retract deadbolt.
• CASE: Heavy gauge, wrought (15/16″ thick)
• DEADBOLT: 1/2″ thick, 1″ throw
• HUBS: Available in various sizes to be compatible with various trims.
• THUMB TURN HUB: 3/16″ (5mm) on the diamond.
• ARMOR FRONT: Brass, bronze, or stainless steel.STRIKE: 7/8″ x 1-1/4″ deadlock type.
• Custom strike for “barn doors”/wall-mounted sliding doors available as a special order.
• DUST BOX: Brass, stainless steel, or US10B.
• CYLINDER: Available to order in 3/4″, 1″, 1-1/8″ lengths in limited keyways.

Ordering Guide

Sliding Door Set Only – Cylinder Sold Separately

**All trims will be pre-selected as part of the included set. For further customization options, please refer to Accurates website and/or Contact Us for the next steps.**

1. Select a backset: Standard options include 2-1/2″, or 2-3/4″. For custom backsets, please contact us.

2. Select a finish: Note: Cylinder sold separately. Standard finishes are limited. Custom finishes may incur additional cost and extended lead times.

3. Determine handing (if applicable): Refer to the handing chart for guidance.

4. Specify door thickness: Standard configuration is designed for 1-3/4″ thick doors.

You may refer to the product specifications or visitAccurates website for more info. For additional assistance, feel free to Contact Us.

Handing

Resource

9100ADAL Sliding Door Hardware Sets Specification

9100SDL Specification

Handing Guide

Maintenance & Cleaning

Warranty

Specification Sheets

Spec.9100ADAL-3
Spec.9100ADAL-3ST
Spec.9100ADAL-5
Spec.9100ADAL-5i
T-ALH.9100SDL
T-ALH.9100SDL.STK

Installation Templates

T-ALH.9100ADAL-3
T-ALH.9100ADAL-3ST
T-ALH.9100ADAL-5 (-5i)
T-ALH.ASADB.STK