Description
These carbide grout removal bits for Dremel tools are designed for fast, controlled removal of old grout from tile joints. Featuring a standard 1/8″ shank, they fit Dremel and other rotary tools and are available in 1/16″, 3/32″, and 1/8″ diameters for fine to aggressive grout removal.
Quantity
Each quantity equals one (1) grout removal bit.
Mix Sizes Quantity Discounts Apply
- Combine 1/16″, 3/32″, and 1/8″ sizes in the same order
- Quantity discounts apply to the total number of bits
- Build the set you need no same-size packs required
Choose a size based on your grout line width and how aggressive you want the cut to be. All bits use a 1/8″ (3.175mm) shank compatible with Dremel and similar rotary tools.
Why Solid Carbide?
- Excellent wear resistance for abrasive grout, mortar residue, and cement-based materials
- Cuts cleanly compared to softer steel bits that dull quickly
- Made in USA
Choose the Right Size
Tip: If youre unsure, start smaller. You can always widen the joint with a larger bit.
- 1/16″ (Fine) best for narrow grout lines and detail work
- 3/32″ (Medium) a good all-around size for common grout joints
- 1/8″ (Aggressive) faster removal for wider joints and heavier grout removal
Compatible Tools & Guides
- Shank: 1/8″ (fits Dremel and similar rotary tools)
- Tool guide compatibility: works with Dremel 565 and Dremel 566 cutting guides
- Not compatible with: Dremel 568-01 grout removal depth-setting attachment
Works Great On
- Tile grout (floor and wall)
- Cement board
- Ceramic wall tile edges (controlled trimming/cleanup)
- Plaster (cleanup and detail removal)
How to Use (Best Results)
- Wear eye protection and a dust mask grout dust is abrasive.
- Start at a moderate speed, then increase only as needed.
- Use light pressure and keep the tool moving to avoid chipping tile edges.
- Make a shallow pass first, then deepen gradually.
- Vacuum dust as you go for better visibility and cooler cutting.
- Construction: premium solid carbide
Reviews
There are no reviews yet.