Description
Carbide Tipped Annular Cutter with One-Touch Shank CBN Ground, ANSI Standard, Cutting Depth: 1″ or 2″
- Carbide Tipped Annular Cutters with ONE-Touch Shank
- CBN ground
- ANSI Standard
- Cuts holes in steel accurately, quickly & safely
- Large holes can be drilled up to ten times faster than regular drills bits
- Make overlapping holes, slotting holes and edge cuts
- Machine-finish hole-no reaming needed when used with Lubricant
- American Standard
- Carbide tipped for long life and quick, efficient and fast cutting through rust and corrosion.
- Center-free design creates through holes by cutting only the periphery of the hole for greater productivity in comparison to twist drills; it Cut clean, bur free hols.
- Precision pilot pins eject the center as a plug of steel.
- Can use on abrasive and tough-to-cut materials
- More cutting teeth to distribute the load evenly so that increase tool life and achieve faster feed rates Maximize cutting performance of any portable magnetic drill press.
- Feature a length flute to pull chips out when deep in the hole
- Carbide tipped cutting edges can be run at a higher speed than HSS, making increased wear resistance and suitability for higher cutting temperatures.
- Produces little slag and few chips for easy disposal. this tool geometry maintains better chip flow
- 3/4″ Weldon shank flats for fast loading and better rigidity which suitable for most Magnetic drills or can be used in a drill press, mill, or lathe.
- And this combined Nitto shank which and the one-touch replacement system for Jetbroach carbide-tipped annular hole cutters. They are designed to be mounted and removed without the use of a tool. This reduces the time needed to replace cutters.
| Item | Dia. of Cut | Cutting Depth |
| 3080-2016 | 11/16″ | 1″ |
| 3080-2018 | 13/16″ | 1″ |
| 3080-2019 | 7/8″ | 1″ |
| 3080-2020 | 15/16″ | 1″ |
| 3081-2016 | 11/16″ | 2″ |
| 3081-2018 | 13/16″ | 2″ |
| 3081-2019 | 7/8″ | 2″ |
| 3081-2020 | 15/16″ | 2″ |
| 3081-2021 | 1″ | 2″ |
| 3081-2022 | 1-1/16″ | 2″ |
Size of Pilot Pins (sold separately):
Cutter diameter 11/16″ is with 3/4″ one-touch shank, Hole of pilot pin = Dia. 1/4″
Cutter diameter 13/16″ to 1-1/16″ are with 3/4″ one-touch shank, Hole of pilot pin = Dia. 5/16″
Reviews
There are no reviews yet.