Description
Designed to fit into factory upper control arm – no need to replace entire O/E control arm assembly.
Caution: Bench grease ball joint prior to installation. When servicing vehicle do not allow the weight of the vehicle to hang on the joint while re-greasing. Grease very slowly with low pressure until grease has worked its way through the joint and purged through the boot. Do not pressurize the ball joint pocket with the grease gun. If there is pressure in the handle of your grease gun STOP. Only use manual grease guns to fill the ball joints. Using a battery or air assist grease gun can cause permanent damage and or premature failure of the ball joint.
Note: When installing ball joint on smaller rim size if installed in all caster or negative camber position my cause rubbing with rim. Always check for proper clearance between all moving parts before moving vehicle. To prevent any damage to vehicle
Specs:
Adjustment Range: 3 Degrees
Sides Ajusted: 1
Qty: Each
Application:
Cadillac
Chevrolet
GM
Reviews
There are no reviews yet.