Shurflo Diaphragm Pump

Description

Shurflo Diaphragm Pump
1.0 – 3.8 GPM integrated pump motor units. Powered by 12V DC or 115V AC power. Pumps are standard with Santoprene diaphragms and Viton valves for excellent service with a wide variety of sprayable products.

Chemical-resistant materials
Can run dry without damage
Self-priming
Low-amp draw
Automatic demand pressure switch on almost all units (8000-812-288 features internal bypass)

Model# 8000-541-236: 12V DC, 3/8″ FPT port, Santoprene diaphragm, Viton valves
Model# 8000-343-236: 12V DC, 3/8″ FPT port, Viton diaphragm and valves
Model# 8000-543-236: 12V DC, 3/8″ FPT port, Santoprene diaphragm, Viton valves
Model# 8000-543-238: 12V DC, 3/8″ FPT port, Santoprene diaphragm, Viton valves
Model# 8030-813-239: 12V DC, 3/8″ FPT port, Santoprene diaphragm, Viton valves
Model# 8002-793-238: 12V DC, 3/8″ FPT port, Santoprene diaphragm, EPDM valves
Model# 8000-532-256: 115V, 3/8″ FPT port, Santoprene diaphragm, Viton valves
Model# 8000-033-236: 115V, 3/8″ FPT port, Viton diaphragm and valves
Model# 8000-533-236: 115V, 3/8″ FPT port, Santoprene diaphragm, Viton valves
Model# 8000-812-288: 115V, 3/8″ FPT port, Santoprene diaphragm, Viton valves
Model# 8000-813-238: 115V, 3/8″ FPT port, Santoprene diaphragm, Viton valves
Model# 8000-713-238: 115V, 3/8″ FPT port, Santoprene diaphragm, EPDM valves

2088 Premium Series – Self-Primes Up To 12 Ft. – Built-In Back Check
Model# 2088-343-135: 12V DC, 1/2″ – 14M port, Santoprene diaphragm, Viton valves
Model# 2088-313-145: 12V DC, 1/2″ – 14M port, Santoprene diaphragm, Viton valves
Model# 2088-712-244: 12V DC, 1/2″ – 14M port, Santoprene diaphragm, EPDM valves
Model# 2088-394-154: 115V, 1/2″ – 14M port, Santoprene diaphragm, Viton valves

4111 – Double Head
Model# 4111-035: 12V, 1/2″ – 14M port, Santoprene diaphragm, Viton valves

166 – Air Drive
Model# 166-200-56: AIR, 3/8″ barb port, EPDM diaphragm and valves

Note: Flow is reduced as pressure is increased (i.e. 100580 pumps 1.12 GPM at 60 PSI) automatic demand control on/off.

Note: These units are designed to withstand many harsh chemicals. However, because compounds and concentrations of materials pumped through these units are beyond the manufacturer’s control, the manufacturer does not provide a warranty on the wet-end of the pump.